Lianyungang Huaneng Power Auxiliary Equipment Co., Ltd. · ISO 9001:2015
Sponge Iron Deaerator Manufacturer in Sweden
Looking for a reliable sponge iron deaerator manufacturer in sweden? We are a China-based power auxiliary equipment manufacturer supplying sweden to power plants, coking plants and industrial boilers, with ISO 9001 / ISO 14001 / ISO 45001 certified production.
- ✓ Quotation in 12 working hours
- ✓ MOQ from 1 pc
- ✓ DDP door-to-door
Sponge Iron Deaerator Manufacturer in Sweden engineered and fabricated in-house
Because design, cutting, welding, machining and assembly all happen in our Lianyungang works, sponge iron deaerator manufacturer in sweden orders move from drawing approval to factory acceptance test without third-party handoffs — the stage where most delivery delays and leakage problems start.
What we deliver
- Spray-tray or rotary-film internals engineered for stable oxygen removal across load swings
- Sponge-iron media vessels with long-life filter material and simple replacement
- Horizontal or vertical arrangement matched to the boiler house layout
- Complete skid: vessel, internals, level control, safety valve and instrumentation
- Factory acceptance test with leakage, torque and sealing-air reports for every unit
Technical specifications
| Body material | Sweden (and 30+ certified grades) |
|---|---|
| Product | Sponge Iron Deaerator |
| Sealing class | dissolved oxygen outlet below 0.03 mg/L (sponge-iron type) or 0.07 mg/L (spray-tray type) |
| Media | Boiler feedwater, industrial circulating water |
| Temperature | Working pressure 0.02–0.6 MPa, saturated temperature duty |
| Size range | Capacity from 2 t/h to 220 t/h per unit |
| Actuation | Electric, pneumatic, electro-hydraulic or manual |
| Standards | ISO 9001:2015, GB/DL/T design codes, third-party inspection on request |
| Export packing | Seaworthy wooden cases, export to Sweden by sea or air |
Why buyers choose Huaneng Power Auxiliary Equipment for sponge iron deaerator manufacturer in sweden
We quote within 24 working hours, keep a dedicated engineer on every project and never subcontract the critical welding and machining. That is why most of our revenue comes from repeat orders and maintenance shutdown programs.
- 24-hour quotation: sizing calculation, sealing concept and actuator recommendation included.
- Leakage performance: dissolved oxygen outlet below 0.03 mg/L (sponge-iron type) or 0.07 mg/L (spray-tray type) verified by factory acceptance testing before shipment.
- Material traceability: mill certificates archived per heat number, retrievable for 5 years.
- Retrofit capability: units dimensioned from site drawings, templates or measured flange positions.
- Qualified supplier: approved by Sinopec, PetroChina, China Guodian, China Datang, CNOOC and Chalco.
Applications we support
In industrial duty the sponge iron deaerator manufacturer in sweden works continuous thermal deoxygenation of feedwater. We size the shaft, bearings and actuator for the actual dust load and temperature of the duct, not just the nominal cross-section, because a gate that jams during a shutdown trip costs far more than the difference in purchase price. Critical welds are inspected 100% on the first unit and by sampling (AQL 1.0) afterwards.
How the project runs
- Send your enquiry — duct dimensions, media and temperature, or drawings of the existing installation.
- Engineering review — sizing, sealing concept, material selection and actuator proposal within 24 hours.
- Quotation — itemized fabrication, actuation, sealing-air system and packing cost.
- Drawing approval — GA and detail drawings issued for your sign-off before production starts.
- Fabrication & FAT — cutting, welding, machining and assembly, then leakage and torque testing witnessed by you or SGS/BV.
- Shipping & support — seaworthy wooden cases, export documentation, installation and commissioning guidance on site.
Exporting sponge iron deaerator manufacturer in sweden to Sweden
We export to Sweden in seaworthy wooden cases with rust-proofing and desiccant. Typical transit is 25–35 days by sea freight to the nearest port, with full export documentation, packing list and certificate of origin. Emergency shutdown spares can be air-freighted within a week.
Related capabilities
Buyers sourcing sponge iron deaerator manufacturer in sweden usually also review our Sponge Iron Deaerator capability, Industrial manufacturing solutions and request a quote. Full dimensional and material documentation is available on request.
FAQ
Questions about Sponge Iron Deaerator Manufacturer in Sweden
What is the price of sponge iron deaerator manufacturer in sweden?
Pricing depends on size, material and sealing class. Send us the duct dimensions, design temperature and pressure, and we will return a detailed quotation with material and fabrication cost breakdown within 24 hours. Replacement units for existing installations can be dimensioned from site drawings or photos.
What is the lead time for sponge iron deaerator manufacturer in sweden?
Standard sizes ship in 20–30 working days after drawing approval; custom-engineered units typically need 25–35 days including internals fabrication. Export deliveries to Sweden usually add 25–35 days by sea freight.
Can you match our existing installation?
Yes. Most of our output is retrofit work: we dimension flue gas dampers, slide gates and silencers from site drawings, templates or measured flange positions, and supply mating flanges, expansion joints and sealing-air systems to match.
Do you support industrial projects?
Yes. We supply industrial operators with sponge iron deaerator manufacturer in sweden units tested for leakage, actuator torque and sealing-air pressure, complete with commissioning support and spare sealing parts. Our qualifications cover Sinopec, PetroChina, China Guodian, China Datang, CNOOC and Chalco supplier systems.