Lianyungang Huaneng Power Auxiliary Equipment Co., Ltd. · ISO 9001:2015
Flue Gas Damper Manufacturer in Italy
Flue Gas Damper Manufacturer in Italy is one of our core products. From single replacement units to full power-plant retrofits, every flue gas damper manufacturer in italy is designed, welded, assembled and pressure-tested in our own works in Lianyungang.
- ✓ Quotation in 12 working hours
- ✓ MOQ from 1 pc
- ✓ DDP door-to-door
Flue Gas Damper Manufacturer in Italy engineered and fabricated in-house
We have supplied flue gas damper manufacturer in italy equipment to power plants, coking plants, cement kilns and chemical works for over a decade. Typical scopes run from single shut-off gates to complete flue gas isolation systems with sealing-air fans and control interlocks.
What we deliver
- Louver-type double-layer blades with sealing-air system for zero-leakage isolation
- Electric, pneumatic or electro-hydraulic actuation with torque limiting and position feedback
- Refractory lining and insulation interfaces engineered for high-temperature ducts
- Duct sections, mating flanges and expansion joints supplied to match the installation
- Factory acceptance test with leakage, torque and sealing-air reports for every unit
Technical specifications
| Body material | Italy (and 30+ certified grades) |
|---|---|
| Product | Flue Gas Damper |
| Sealing class | leakage rate below 0.5% with sealing air, 100% shut-off on request |
| Media | Flue gas, hot air, pulverized coal, dusty gas |
| Temperature | Up to 450 °C continuous, 650 °C short-term |
| Size range | Duct sections from 300 × 300 mm up to 6,000 × 6,000 mm |
| Actuation | Electric, pneumatic, electro-hydraulic or manual |
| Standards | ISO 9001:2015, GB/DL/T design codes, third-party inspection on request |
| Export packing | Seaworthy wooden cases, export to Italy by sea or air |
Why buyers choose Huaneng Power Auxiliary Equipment for flue gas damper manufacturer in italy
We quote within 24 working hours, keep a dedicated engineer on every project and never subcontract the critical welding and machining. That is why most of our revenue comes from repeat orders and maintenance shutdown programs.
- 24-hour quotation: sizing calculation, sealing concept and actuator recommendation included.
- Leakage performance: leakage rate below 0.5% with sealing air, 100% shut-off on request verified by factory acceptance testing before shipment.
- Material traceability: mill certificates archived per heat number, retrievable for 5 years.
- Retrofit capability: units dimensioned from site drawings, templates or measured flange positions.
- Qualified supplier: approved by Sinopec, PetroChina, China Guodian, China Datang, CNOOC and Chalco.
Applications we support
In industrial duty the flue gas damper manufacturer in italy works bi-directional isolation under high temperature and dust load. We size the shaft, bearings and actuator for the actual dust load and temperature of the duct, not just the nominal cross-section, because a gate that jams during a shutdown trip costs far more than the difference in purchase price. Critical welds are inspected 100% on the first unit and by sampling (AQL 1.0) afterwards.
How the project runs
- Send your enquiry — duct dimensions, media and temperature, or drawings of the existing installation.
- Engineering review — sizing, sealing concept, material selection and actuator proposal within 24 hours.
- Quotation — itemized fabrication, actuation, sealing-air system and packing cost.
- Drawing approval — GA and detail drawings issued for your sign-off before production starts.
- Fabrication & FAT — cutting, welding, machining and assembly, then leakage and torque testing witnessed by you or SGS/BV.
- Shipping & support — seaworthy wooden cases, export documentation, installation and commissioning guidance on site.
Exporting flue gas damper manufacturer in italy to Italy
We export to Italy in seaworthy wooden cases with rust-proofing and desiccant. Typical transit is 25–35 days by sea freight to the nearest port, with full export documentation, packing list and certificate of origin. Emergency shutdown spares can be air-freighted within a week.
Related capabilities
Buyers sourcing flue gas damper manufacturer in italy usually also review our Flue Gas Damper capability, Industrial manufacturing solutions and request a quote. Full dimensional and material documentation is available on request.
FAQ
Questions about Flue Gas Damper Manufacturer in Italy
What is the price of flue gas damper manufacturer in italy?
Pricing depends on size, material and sealing class. Send us the duct dimensions, design temperature and pressure, and we will return a detailed quotation with material and fabrication cost breakdown within 24 hours. Replacement units for existing installations can be dimensioned from site drawings or photos.
What is the lead time for flue gas damper manufacturer in italy?
Standard sizes ship in 15–25 working days after drawing approval; custom-engineered units typically need 20–30 days for custom-engineered units. Export deliveries to Italy usually add 25–35 days by sea freight.
Can you match our existing installation?
Yes. Most of our output is retrofit work: we dimension flue gas dampers, slide gates and silencers from site drawings, templates or measured flange positions, and supply mating flanges, expansion joints and sealing-air systems to match.
Do you support industrial projects?
Yes. We supply industrial operators with flue gas damper manufacturer in italy units tested for leakage, actuator torque and sealing-air pressure, complete with commissioning support and spare sealing parts. Our qualifications cover Sinopec, PetroChina, China Guodian, China Datang, CNOOC and Chalco supplier systems.